Port-Hamiltonian formulation and structure-preserving discretization of hyperelastic strings

Port-Hamiltonian (PH) systems provide a framework for modeling, analysis and control of complex dynamical systems, where the complexity might result from multi-physical couplings, non-trivial domains and diverse nonlinearities. A major benefit of the PH representation is the explicit formulation of power interfaces, so-called ports, which allow for a power-preserving interconnection of subsystems to compose flexible multibody systems in a modular way. In this work, we present a PH representation of geometrically exact strings with nonlinear material behaviour. Furthermore, using structure-preserving discretization techniques a corresponding finite-dimensional PH state space model is developed. Applying mixed finite elements, the semi-discrete model retains the PH structure and the ports (pairs of velocities and forces) on the discrete level. Moreover, discrete derivatives are used in order to obtain an energy-consistent time-stepping method. The numerical properties of the newly devised model are investigated in a representative example. The developed PH state space model can be used for structure-preserving simulation and model order reduction as well as feedforward and feedback control design.Comment: Submitted as a proceeding to the ECCOMAS Thematic Conference on Multibody Dynamics 202

Two-photon interference from remote deterministic quantum dot microlenses

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 110, 011104 (2017) and may be found at https://doi.org/10.1063/1.4973504.We report on two-photon interference (TPI) experiments using remote deterministic single-photon sources. Employing 3D in-situ electron-beam lithography, we fabricate quantum-light sources at specific target wavelengths by integrating pre-selected semiconductor quantum dots within monolithic microlenses. The individual single-photon sources show TPI visibilities of 49% and 22%, respectively, under pulsed p-shell excitation at 80 MHz. For the mutual TPI of the remote sources, we observe an uncorrected visibility of 29%, in quantitative agreement with the pure dephasing of the individual sources. Due to its efficient photon extraction within a broad spectral range (>20 nm), our microlens-based approach is predestinated for future entanglement swapping experiments utilizing entangled photon pairs emitted by distant biexciton-exciton radiative cascades.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeEC/FP7/615613/EU/External Quantum Control of Photonic Semiconductor Nanostructures/EXQUISIT

Efficient single-photon source based on a deterministically fabricated single quantum dot - microstructure with backside gold mirror

This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 111, 011106 (2017) and may be found at https://doi.org/10.1063/1.4991389.We present an efficient broadband single-photon source which is fabricated by a flip-chip gold-bonding technique and in-situ electron beam lithography. The device comprises a single InGaAs quantum dot that is centered at the bottom of a monolithic mesa structure and located above a gold mirror for enhanced photon-extraction efficiency. We show a photon-extraction efficiency of ηext=(18±2) % into a numerical aperture of 0.4 and a high suppression of multi-photon events from this source with g(2)(0)=0.015±0.009. Our deterministic device with a backside gold mirror can be combined with electrical contacts and piezo-tuning capabilities in future refinements, which represents an important step towards a spectrally tunable plug-and-play quantum-light source with broadband enhancement for photonic quantum networks.DFG, SFB 787, Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeBMBF, 03V0630TIB, Entwicklung einer Halbleiterbasierten Einzelphotonenquelle für die Quanteninformationstechnologi

Clinical and patient-reported outcomes of implants placed in autogenous bone grafts and implants placed in native bone: A case-control study with a follow-up of 5-16 years

AIMS To compare the radiographic marginal bone levels of implants placed in sites previously augmented with autogenous bone grafts and implants placed in native bone. Secondary outcomes included: implant survival, periodontal/peri-implant parameters as well as short- and long-term patient-reported outcome measures. MATERIALS AND METHODS The study was designed as a case-control study including 38 patients equally distributed into two groups (previously augmented with autogenous bone blocks [AB] and implants placed in native bone [NB]). In total, 67 implants were placed. Clinical, radiographic and patient-reported outcome measures (PROMs), and complication rates were assessed based on a chart review and at a follow-up examination (≧5 years after implant placement). Nonparametric mixed models were applied for the comparison of the two groups because of the clustered data. The data were analyzed descriptively, and p-values were calculated using nonparametric mixed models to account for the clustered data. RESULTS The mean follow-up time was 10.2 years (range 6-13 years; AB) and 8.3 years (range 5-16 years; NB). One implant was lost in group NB (97.5% survival rate) and none in group AB (100%). Following primary augmentation, six major complications (wound dehiscences, acute pulpitis, intra- and extraoral sensitivity disturbances) were observed at the donor sites. At time of implant placement, only minimal complications occurred and only in group NB. Median marginal bone levels at the follow-up were significantly higher in group NB (1.15; Q1: 0.50 mm/Q3: 1.83 mm) than in group AB (1.58; Q1: 1.01 mm/Q3: 2.40 mm; p = 0.0411). Probing depth, bleeding on probing and recession values were similar in both groups. PROMs revealed high visual analog scale values (i.e., high satisfaction) for both procedures. CONCLUSIONS Dental implants placed in sites augmented with autogenous bone or in native bone revealed healthy peri-implant tissues after 5-16 years. Marginal bone levels were significantly higher for implant placed in native bone. Complications following primary augmentation encompassed every third patient but were mostly transient

Electrically tunable single-photon source triggered by a monolithically integrated quantum dot microlaser

This work was supported by the German Research Foundation (DFG) under Grant Nos. RE2974=9 - 1 and SCHN1376=1-1 and the German Federal Ministry of Education and Research (BMBF) for support through the VIP-project QSOURCE (Grant No. 03V0630).We report on a quantum dot micropillar-based single-photon source demonstrating tunable emission energy via an applied electric field and driven by an on-chip, high-β, whispering-gallery-mode microlaser. The cavity-enhanced single-photon source is monolithically integrated with an electrically driven, coherent excitation source. The device concept features low laser-threshold currents of a few tens of µA, has a small footprint with a device area of ≅ 200 µm2 and demonstrates high single-photon purity with g(2)(0) as low as 0.07 ± 0.03 under pulsed electrical excitation of the microlaser. The electric field applied along the growth direction of the single-photon emitter allows the emission to be tuned by up to 1.1 meV via the quantum-confined Stark effect, bringing it into resonance with the fundamental mode of the surrounding micropillar resonator for enhanced emission via the Purcell effect.PostprintPeer reviewe

Randomized controlled clinical study assessing two membranes for guided bone regeneration of peri-implant bone defects: 3-year results

OBJECTIVES To assess two- and three-dimensional changes of the peri-implant tissues as well as clinical, biological, and radiological outcomes of implants having been treated with resorbable or nonresorbable membranes at 3 years. MATERIALS AND METHODS Twenty-three patients were re-examined after having received a single-tooth implant in the esthetic zone in conjunction with guided bone regeneration (GBR) using either a resorbable (RES) or a titanium-reinforced nonresorbable membrane (N-RES) and demineralized bovine bone mineral. Volumetric and linear as well as clinical and radiographic measurements were performed at crown insertion (baseline), at 1 year (FU-1) and 3 years (FU-3). Statistics were performed by means of parametric and nonparametric tests. RESULTS Minor, but ongoing buccal volume loss was observed in both groups during the 3-year follow-up. A slightly higher volume loss was observed in group RES (-0.22 mm) compared to N-RES (-0.14 mm) at 1 year (FU-1), but aligned at 3 years (FU-3) RES (-0.30 mm) N-RES (-0.32 mm). All changes over time were statistically significantly different within (p .05). Stable median interproximal bone levels after 3 years (FU-3); 0.26 mm (0.04; 0.36) (RES) and 0.14 mm (0.08; 0.20) (N-RES) and healthy tissues (BOP, PD) were obtained with both membranes. CONCLUSIONS Both treatment modalities resulted in minor, but ongoing contour changes of the peri-implant tissues. Stable interproximal bone levels and healthy tissues can be obtained with membranes up to 3 years

MOSAiC goes O2A - Arctic Expedition Data Flow from Observations to Archives

During the largest polar expedition in history starting in September 2019, the German research icebreaker Polarstern spends a whole year drifting with the ice through the Arctic Ocean. The MOSAiC expedition takes the closest look ever at the Arctic even throughout the polar winter to gain fundamental insights and most unique on-site data for a better understanding of global climate change. Hundreds of researchers from 20 countries are involved. Scientists will use the in situ gathered data instantaneously in near-real time modus as well as long afterwards all around the globe taking climate research to a completely new level. Hence, proper data management, sampling strategies beforehand, and monitoring actual data flow as well as processing, analysis and sharing of data during and long after the MOSAiC expedition are the most essential tools for scientific gain and progress. To prepare for that challenge we adapted and integrated the research data management framework O2A “Data flow from Observations to Archives” to the needs of the MOSAiC expedition on board Polarstern as well as on land for data storage and access at the Alfred Wegener Institute Computing and Data Center in Bremerhaven, Germany. Our O2A-framework assembles a modular research infrastructure comprising a collection of tools and services. These components allow researchers to register all necessary sensor metadata beforehand linked to automatized data ingestion and to ensure and monitor data flow as well as to process, analyze, and publish data to turn the most valuable and uniquely gained arctic data into scientific outcomes. The framework further allows for the integration of data obtained with discrete sampling devices into the data flow. These requirements have led us to adapt the generic and cost-effective framework O2A to enable, control, and access the flow of sensor observations to archives in a cloud-like infrastructure on board Polarstern and later on to land based repositories for international availability. Major roadblocks of the MOSAiC-O2A data flow framework are (i) the increasing number and complexity of research platforms, devices, and sensors, (ii) the heterogeneous interdisciplinary driven requirements towards, e. g., satellite data, sensor monitoring, in situ sample collection, quality assessment and control, processing, analysis and visualization, and (iii) the demand for near real time analyses on board as well as on land with limited satellite bandwidth. The key modules of O2A's digital research infrastructure established by AWI are implementing the FAIR principles: SENSORWeb, to register sensor applications and sampling devices and capture controlled meta data before and alongside any measurements in the field Data ingest, allowing researchers to feed data into storage systems and processing pipelines in a prepared and documented way, at best in controlled near real-time data streams Dashboards allowing researchers to find and access data and share and collaborate among partners Workspace enabling researchers to access and use data with research software utilizing a cloud-based virtualized infrastructure that allows researchers to analyze massive amounts of data on the spot Archiving and publishing data via repositories and Digital Object Identifiers (DOI

Evidence for the h_b(1P) meson in the decay Upsilon(3S) --> pi0 h_b(1P)

Using a sample of 122 million Upsilon(3S) events recorded with the BaBar detector at the PEP-II asymmetric-energy e+e- collider at SLAC, we search for the $h_b(1P)$ spin-singlet partner of the P-wave chi_{bJ}(1P) states in the sequential decay Upsilon(3S) --> pi0 h_b(1P), h_b(1P) --> gamma eta_b(1S). We observe an excess of events above background in the distribution of the recoil mass against the pi0 at mass 9902 +/- 4(stat.) +/- 2(syst.) MeV/c^2. The width of the observed signal is consistent with experimental resolution, and its significance is 3.1sigma, including systematic uncertainties. We obtain the value (4.3 +/- 1.1(stat.) +/- 0.9(syst.)) x 10^{-4} for the product branching fraction BF(Upsilon(3S)-->pi0 h_b) x BF(h_b-->gamma eta_b).Comment: 8 pages, 4 postscript figures, submitted to Phys. Rev. D (Rapid Communications

Jet energy measurement with the ATLAS detector in proton-proton collisions at root s=7 TeV

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of √s = 7TeV corresponding to an integrated luminosity of 38 pb-1. Jets are reconstructed with the anti-kt algorithm with distance parameters R=0. 4 or R=0. 6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta pT≥20 GeV and pseudorapidities {pipe}η{pipe}<4. 5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2. 5 % in the central calorimeter region ({pipe}η{pipe}<0. 8) for jets with 60≤pT<800 GeV, and is maximally 14 % for pT<30 GeV in the most forward region 3. 2≤{pipe}η{pipe}<4. 5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon pT, the sum of the transverse momenta of tracks associated to the jet, or a system of low-pT jets recoiling against a high-pT jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-pT jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating from light quarks, heavy quarks or gluons are also discussed and the corresponding uncertainties are determined. © 2013 CERN for the benefit of the ATLAS collaboration